- Research
- Open access
- Published:
Comparative gene expression supports the origin of the incisor and molar process from a single endite in the mandible of the red flour beetle Tribolium castaneum
EvoDevo volume 4, Article number: 1 (2013)
Abstract
Background
The biting edge of the primitive arthropod mandible consists of a biting incisor process and a crushing molar process. These structures are thought to be derived from a structure known as an endite but the precise details of this are not understood. Various hypotheses concerning the number of endites present in the arthropod mandible have been proposed.
In the developing embryo, the mandible has an inner and outer lobe that are likely to develop into the incisor and molar processes of the larval mandible; these two lobes are commonly held to be derived from separate endites and to be serially homologous to the galea and lacinia endites of the maxillary appendage respectively (Machida).
Results
We undertook a study of the development of the embryonic mandible of the beetle Tribolium castaneum using the expression of developmental genes as markers of the developing endites in the mandible and maxilla.
The Tribolium ortholog of paired (Tc-prd) has expression domains in the developing maxillary and labial endites as well as the inner and outer lobes of the mandible. Following the expression of Tc-prd in the developing mandible through to late stage embryos shows that the molar and incisor process develop from the inner and outer lobes respectively.
In addition to Tc-prd, w e compared the expression of genes in the endites of the maxilla to the mandible to draw conclusions about the number of endites in the mandible. Homologs of dachshund are typically expressed in the endites of mandibulate gnathal appendages. Comparison of the expression of Tc-prd, Tribolium dachshund (Tc-dac) and Tribolium wingless (Tc-wg) between the endites of the maxilla and the mandible suggest that, while there are two endites in the maxilla only a single endite is present in the mandible.
Conclusions
Comparative gene expression suggests that the Tribolium mandible has a single endite from which both mandible lobes are derived. Our results do not support Machida’s hypothesis homologising the incisor and molar processes of the mandible to the galea and lacinia endites of the maxilla. We propose, instead, that both incisor and molar processes are derived from a single endite serially homologous to the lacinia of the maxilla.
Introduction
The typical insect mandible is an unsegmented appendage with a biting edge consisting of an incisor and a molar process. Like all post-antennal appendages, it has evolved from a biramous limb consisting of two branches, a telopodite and an exopodite that are attached to the protopodite (the base) [1]. On the protopodite of diverse arthropod appendages, lobed structures called endites are found that are often involved in food processing (see Figure 1A).
Insects have lost the endites on the leg appendages but typically retain them on the mandibular, maxillary and labial appendages, otherwise known as the gnathal appendages. The canonical insect maxilla and labium both have two endites - the lacinia and galea on the maxilla and the postmentum and prementum on the labium.
Although endites typically consist of a lobe covered in bristle, there is a diversity of endite forms, with tooth-like endites present in the lacinia of some insect maxillae, long needle-like endites in the mosquito proboscis and the long tube-like proboscis of lepidopterans which is formed from maxillary galea endites.
The mandibular gnathal edge of insects (and other mandibulate arthropods) is likely to be derived from endites but the number of endites that make up the mandibular biting edge and the precise manner by which this structure evolved is not known. The principal debate concerns the precise number of endites that make up the mandibular gnathal edge which has generally been interpreted as being comprised of two endites, which develop into the incisor and molar process [2–6]. An alternative view is that the mandibular gnathal edge has evolved from the proximal-most endite (indicated with a star in Figure 1A) on a primitive biramous limb [7, 8] meaning that both the incisor and molar processes derive from a single endite (see Figure 1B). Less conventionally, it has been suggested that the mandible gnathal edge is not derived from endites at all, consisting instead of a differentiated substructure not homologous to true endites [9].
The developing embryonic mandibular appendage of insects is a relatively undifferentiated lobe-like structure with few morphological landmarks. Two structural features that are present are the inner and outer lobes, as revealed by SEM studies of embryonic mandibular appendages of various hexapods [5, 6, 10]. A similar morphology is observed in myriapods, for example, on the embryonic mandible of the millipede Glomeris marginata[11]. The inner and outer lobes are generally interpreted as representing the developing molar and incisor processes of the mandible, respectively, although this has not been shown by gene expression or gene function.
From a study of the external morphology of the jumping bristletail (Pedetontus unimaculatus Machida), Machida hypothesised that the inner and outer lobe are derived from two separate endites [5]. Machida also hypothesised that the two endites of the maxillary appendage (the lacinia and galea) are serially homologous to the incisor and molar processes, respectively, as they develop in a similar position on their respective appendages (see Figure 1C).
Expression of genes in the endites
In order to investigate whether the inner and outer lobes are derived from separate endites and whether these later form the incisor and molar processes we compared endite development and expression of a number of genes in the mandibular and maxillary appendages of the red flour beetle Tribolium castaneum.
To show whether the mandible has one or two endites and whether the incisor and molar could be homologous to the maxillary lacinia and galea (compare Figure 1B with C) we needed to demonstrate precisely where the incisor and molar develop in the mandibular limb bud. We also needed to investigate endite development in the mandible, in terms of the number of endites and the positions of the developing endites.
Several genes have been shown to be expressed in developing endites of Tribolium including the Tribolium orthologs of the Drosophila genes paired (Tc-prd)[12, 13], dachshund (Tc-dac)[11, 14–16] and Distal-less (Tc-Dll) [17]. We studied the expression of these genes as well as the Tribolium homolog of wingless (Tc-wg) in the developing endites of embryos by in situ hybridisation. We followed the expression of these genes into late embryonic development and related the expression patterns of these genes to morphological features of the developing mandible. The morphology of the inner and outer lobes of the mandible was also studied by scanning electron microscopy (SEM). The pars incisiva (incisor process) and pars molaris (molar process) were examined by light microscopy of cuticle preparations from first instar larvae.
Methods
Tribolium castaneum culture
Wild-type Tribolium castaneum (San Bernardino strain) were kindly provided by Gregor Bucher (Department of Developmental Biology, Georg-August-University Göttingen, Göttingen, Germany) and raised at 32°C in organic wholemeal flour supplemented with 5% brewer’s yeast.
Cloning of Tribolium orthologs
In order to synthesise antisense labelled RNA probes to detect gene expression by in situ hybridisation, partial cDNA sequences of Tc-prd and Tc-wg were identified in the Tribolium genome sequence [18] using a BLAST search with Drosophila orthologs as the query. Identified sequences were amplified and cloned from mixed stage Tribolium cDNA.
Tc-prd, Tc-Dll, Tc-hth and Tc-ser were amplified from cDNA by PCR amplification using the following primers: Tc-Dll (fw: 5’-CAGCAGGTGCTCAATGTGTT-3’ and rv: 5’-ATTAAACAGCTGGCCACACC-3’), Tc-prd (fw: 5’-ATGCACAGACATTGCTTTGG-3’ and rv: 5’-GGATCGTCACAGTGTTGGTG-3’), Tc-hth (fw: 5’-AGCCGTTTTCTCCAAACAGA-3’ and rv: 5’-GGATAGTGCGCGTACTGGTT-3’), and Tc-ser (fw: 5’- AAGGCAACGTTTGCCAATTCGG-3’ and rv: 5’-TCCCATGTGCAACTTCCTGGAGAT-3’, fw: 5’-TCCTTCTGCTACTCAACCTGCTAC-3’ and rv: 5’-GGGGACATTCGCACTTGAACAT-3’, fw: 5’- ATTTGGTGCGGTCTGGGAAACT -3’ and rv: 5’-TCGGGGTTTTGCGCTTTGTAGA-3’). Three sections of Tc-ser were amplified and cloned to provide more than 2.5 kb of gene specific sequence and to increase the strength of signal of gene expression in whole-mount in situ hybridisation experiments.
Accession numbers are as follows: Tc-Dll (GenBank: NM_001039439), Tc-prd (GenBank: NM_001077622), Tc-hth (GenBank: NM_001039400), and Tc-ser (GenBank: XM_964393). A plasmid clone of the Tribolium homolog of dachshund, Tc-dac (Genbank: XM_964678.2, amplified with primers: fw:5’-CCNGTNGTNTGYAAYGTNGARCARGT-3’ and rv:5’-CKNGCRTTRTCNGCNGCNACYTT-3’) was provided by Dr. Nikola-Michael Prpic-Schäper (Department of Developmental Biology, Georg-August-University Göttingen, Göttingen, Germany).
A plasmid clone of a Tribolium homolog of wingless, Tc-wg (GenBank: NM_001114350.1, amplified with primers: fw:5’-GGATGCAGGGAAACTGCCTTC and rv: 5’-AACGCAAGTATGTATGGTTCT-3’) was provided by Dr. Andrew Economou (Department of Craniofacial Development, King’s College London, UK).
Cuticle preparation
Cuticles from first instar larvae were prepared in Hoyer’s medium and lactic acid as previously described [19]. The cuticle preparations were visualised by fluorescence microscopy with an excitation frequency of 488nm.
Whole mount in situ hybridisation
Tribolium embryos were fixed in 9% formaldehyde from 24 to 72 h after egglay. Single stainings (nitro blue tetrazolium/5-bromo-4-chloro-3-indolyl phosphate NBT/BCIP) and double stainings (NBT/BCIP and FastRed) were performed as previously described [20]. Some modifications, such as the frequency and duration of washes, were incorporated from alternative in situ hybridisation protocols [21].
Stained embryos were dissected from the yolk and mounted in glycerol. Mandibular and maxillary appendages were dissected with sharpened tungsten wire. Embryos and dissected gnathal appendages were visualised using differential interference contrast (DIC) microscopy with an Imager M1 microscope (Carl Zeiss Ltd., Cambridge, UK). Images were taken with Axiocam HRC (Carl Zeiss Ltd., Cambridge, UK) and processed using Axiovision product suite software release 4.8.2. (Carl Zeiss Ltd., Cambridge, UK). Images were processed with GIMP (release 2.6.10) [22].
Scanning electron microscopy
Embryos were fixed as described for the whole mount in situ hybridisation protocol. Fixed embryos were rinsed in ethanol and immersed in hexamethyldisiloxane (HMDS), air dried and sputter coated with gold. Images were taken in a JEOL JSM-5410LV scanning microscope (JEOL Ltd., Tokyo, Japan) at a magnification of 100- to 350-fold and processed with DigitalMicrograph (Gatan Inc., Pleasanton, CA, USA).
Results and discussion
Scanning electron micrographs of the inner and outer lobe of the mandible in Tribolium embryos
Scanning electron micrographs (SEMs) were taken of Tribolium embryos to relate the embryonic inner and outer mandibular lobes to the expression of the various genes of interest (Figure 2) using high resolution images. The developing mandible has two lobes perpendicular to the limb’s proximal-distal (PD) axis. The proximal lobe (the inner lobe - star in Figure 2), relates to the molar process and the distal lobe, (the outer lobe - arrowhead in Figure 2), relates to the incisor process and these are distinguishable in the developing mandible of germ band extending embryos (see Figure 2). We base this correlation on the expression of Tc-prd, which marks the developing inner and outer lobes during embryogenesis (see below).
The inner and outer lobes resemble the maxillary endites, the lacinia and galea, and are in a comparable position along the PD axis. However, the inner and outer mandibular lobes are larger and less defined than the maxillary endites (Figure 2A to C).
SEM studies in other insects have demonstrated that the inner and outer lobes are present in the cricket Gryllus assimilis[10], the sawfly Athalia rosae[6] and the jumping bristletail Pedetontus unimaculatus[5]. A study into the expression of PD domain genes in the gnathal appendages of the millipede Glomeris marginata similarly shows a mandible with an inner and an outer lobe [11].
These lobes are often interpreted as endites, but aside from similarities of morphology and position of development, there is little other evidence to support this interpretation. We wanted to examine the expression of marker genes for the development of endites to see if we could determine if the inner and outer lobes can reasonably be interpreted as separate endites.
Tc-prd marks the developing endites in the embryonic gnathal appendages
In order to show where the endites develop in the gnathal appendages, we studied expression of Tc-prd, which, in addition to its role as a pair rule gene, is expressed in the endites of the maxillary and labial appendages during embryogenesis as well as the inner and outer lobes of the mandible [13] soon after formation of the limb buds (Figure 3B) and is continually expressed in the gnathal appendage endites throughout embryogenesis. Any changes that occur to the endites during embryogenesis are associated with a corresponding change in Tc-prd expression. When the lacinia and galea endites fuse to form the ventral branch, the two Tc-prd expression domains also fuse (see star in Figure 4B). Apparent loss or reduction of the labial endite by late embryogenesis results in loss of Tc-prd expression (see Figure 4B).
There are two domains of Tc-prd expression in the maxillary appendages that relate to the two endites, which are likely to be the presumptive lacinia and galea (Figure 3C, D). The endite expression domain of Tc-prd first appears in the maxilla in the developing lacinia endite (arrow in Figure 3A, B).
Tc-Dll is expressed in the telopodites of all limb bud primordia except the mandible (Figure 3C, D). A proximal domain of Tc-Dll, distinct from the distal telopodite domain is expressed in the developing maxillary endites. Expression of Tc-Dll is first seen in the lacinia, and appears in the galea at a later stage [23]. As Tc-Dll is co-expressed with Tc-prd in the first proximal domain to appear, it is likely that this is the lacinia endite (arrow in Figure 3A, B). The galea endite forms during a later stage (Figure 3C).
In the mandible we can see a single domain of Tc-prd expression (Figure 3C, D) which is significantly larger than either of the two domains found in the maxillary or labial appendages. There is no evidence that Tc-prd expression in the mandible is divided into two separate domains. There is one domain of Tc-prd expression in the labial appendages (Figure 3D).
Considering the position and timing of expression of Tc-prd in the mandibular limb bud compared to the endites of the maxillary and labial appendages, it seems reasonable to conclude that Tc-prd expression in the mandible is also an endite-specific expression domain.
The mandibular inner and outer lobes are the developing molar process and incisor process, respectively
In order to show where the gnathal edge develops on the mandibular limb bud, we studied Tc-prd expression through to later stage embryos when the mandible more closely resembles the larval mandible.
In earlier stages of development, Tc-prd expression is present throughout the inner and outer lobes (Figure 4A). In very late stages, immediately prior to the formation of the cuticle, the single domain of Tc-prd expression covers most of the presumptive gnathal edge including the developing incisor (arrow in Figure 4B, C) and molar (arrowhead in Figure 4B, C) processes.
At this stage, the two maxillary endites have fused to form the ventral branch of the maxilla (star in Figure 4B) and there is only one corresponding domain of Tc-prd expression in the maxillae. The ventral branch later develops into the lacinia and galea in adult beetles [24], however the expression of Tc-prd is not known at this stage.
The morphology of the embryonic mandibles at this late stage (Figure 4B, C, F) is beginning to resemble the morphology of the larval mandibles (Figure 4D, G). The outer lobe has elongated to form the distal point of the incisor process (arrow in Figure 4C). Both mandibles have moved to the midline in front of the mouth (see red arrows in Figure 4E and compare to Figure 4F) and the inner and outer lobes are now adjacent to each other as they are in the first instar larvae (see Figure 4D).
Assuming that there is no significant change in Tc-prd expression during later embryogenesis, the expression of Tc-prd in the developing incisor and molar processes of a late stage Tribolium embryo is evidence that the inner lobe relates to the molar process and the outer lobe relates to the incisor process. In Figure 4G we show where this domain of Tc-prd expression most likely relates to in the larval mandible.
The expression patterns of Tc-prd, Tc-wg and Tc-dac in the mandible and maxilla suggest the mandible may be composed of one endite
Having demonstrated that the inner and outer lobes are likely to relate to the molar and incisor processes, respectively, we wanted to determine whether the inner and outer lobes develop from separate endites or from a single endite. There is a one-to-one correspondence of Tc-prd expression and the development of endites (or lobes such as the ventral branch) through ontogeny. The single large domain of mandibular Tc-prd expression could indicate that both molar and incisor derive from a single endite. An alternative interpretation, however, is that this single domain of Tc-prd corresponds to the fusion of two endites. In order to try to differentiate between these two possibilities we compared the expression of Tc-prd with additional genes that have characteristic expression domains in the endites of the gnathal appendages.
Tc-wg expression in the mandibular and maxillary appendages
Previous studies in Tribolium and Schistocerca of the expression of homologs of wingless (wg), a gene with important roles in segmentation and limb development, showed that wg, while expressed in a ventral stripe in insect limbs, specifically fades at the locations of the forming maxillary and labial endites [23]. A similar situation seems to be apparent in the millipede Glomeris[25]. In order to help determine the endite composition of the mandible we examined the expression of Tc-wg in the mandible.
As in other arthropods, Tc-wg is expressed in a stripe that runs through the middle of the ventral ectoderm of all appendages (Figure 5A). In the maxilla, Tc-wg expression retracts from both of the two endites to form two gaps in Tc-wg expression (see arrows in Figure 5B). There is no expression in the developing lacinia endite (see white arrow in Figure 5B).
In the mandible, only one gap in Tc-wg expression develops (arrowhead in Figure 5B). The groove or boundary between the inner and outer lobes of the mandible does not have Tc-wg expression (see white arrowhead in Figure 5B). By contrast, the groove between the maxillary endites shows Tc-wg expression. This single gap in the ventral domain of Tc-wg expression in the mandible would therefore support the view that there is only a single endite present.
Tc-dac expression in the mandibular and maxillary endites
Homologs of dachshund (dac) are expressed in the distal part of developing endites of mandibulates. In the cricket Gryllus for example, Gm-dac is expressed in the distal half of the maxillary and labial endites [15]. In the crustaceans Triops and Thamnocephalus, the homolog of dac is expressed in the distal half of each of the five endites present on the phyllopodous limbs [16].
The characteristic expression pattern of dac homologs in endites suggests that dac may be used as a marker of endite development in the embryonic mandible. dac homologs are strongly expressed in distal part of the mandible in the cricket Gryllus[15], the crustacean Porcellio[26] and the millipede Glomeris[11]. We were interested in the expression of Tc-dac and whether it could inform us of the endite composition of the mandible appendage.
There are two domains of Tc-dac expression in post-antennal appendages of Tribolium, a proximal domain and a distal domain [14]. The proximal and distal domains of Tc-dac in the maxilla are shown in Figure 6A.
In the maxilla, the proximal domain of Tc-dac includes expression in the distal protopodite, which lacks Tc-prd expression (see white arrowhead in Figure 6A, C), and the endites. In the endites that are marked by Tc-prd expression, Tc-dac is expressed in the distal half of the lacinia endite (arrowhead in Figure 6A). Unlike in the cricket Gryllus, Tc-dac expression is faint in the galea endite of the maxilla. Expression of Tc-dac was too faint to determine endite specific expression in the labial endite.
In the embryonic mandible, Tc-dac is expressed in the distal part of the mandible (as in Gryllus and Porcellio) which includes co-expression in the outer lobe with Tc-prd (black arrowhead in Figure 6B) and expression in the lateral protopodite which lacks Tc-prd expression (see white arrowhead in Figure 6B, D). Tc-dac is not expressed in the inner lobe (white star in Figure 6B). The mandibular expression of Tc-dac and Tc-prd resembles the expression of these genes in the developing lacinial maxillary endite (see Figure 6F).
The lack of a distal endite domain in the galea endite discredits the use of Tc-dac as an endite marker to some extent. However the expression pattern of Tc-dac in the lacinia endite is similar to that of Gb-dac in the lacinia and galea endites of the cricket Gryllus which does have a separate lacinia and galea in the first instar larval stage unlike Tribolium[15]. The presence of these two endites, the lacinia and galea, in the maxilla is ancestral for the Hexapoda [1]. For these reasons we suggest that using Tc-dac as a marker for the distal part of the mandibular and lacinia endites is valid. Expression of Tc-dac in the outer lobe and lack of expression of Tc-dac in the inner lobe suggests, therefore, that the outer lobe is the distal part of a single mandibular endite.
Interestingly, as the mandibular bud develops, Tc-dac expression is lost from a circular region in the distal-most part of the outer lobe of the developing mandible. Tc-dac is expressed continuously in the outer lobe of the mandible during earlier stages when the inner and outer lobes have begun to form (Figure 7A). In the maxillae of the same embryo, the lacinia and galea have already formed (Figure 7B). The circular gap of Tc-dac expression in the outer lobe of the mandible does not appear till later (asterisk in Figure 7C, D), after the endites have formed.
Study of the expression of the Tribolium homolog of serrate (Tc-ser) shows that there is a cap of Tc-ser expression (see arrowhead in Figure 7F) that appears mutually exclusive with the expression of Tc-dac in the outer lobe (see arrowhead in Figure 7E). Considering the position of this Tc-ser cap domain at the distal most point of the outer lobe on the mandibular limb bud, we propose that this is the presumptive incisor process.
Tc-dac expression suggest that the mandible has one endite
As noted above, homologs of dac have characteristic expression pattern in the distal part of endites of mandibulate arthropods (Figure 8A). The expression of dac homologs in the distal part of the mandible (the outer lobe) therefore appears to be conserved in mandibulate arthropods. Using Tc-dac as a marker for endite development, we would expect there to be Tc-dac expression in the distal part of each lobe if both the inner and outer lobe are two separate endites (Figure 8B).
What we have shown however, is that Tc-dac is expressed in the outer lobe but is not expressed in the inner lobe of the mandible (Figure 8C,D). This suggests that the outer lobe of the mandible could represent the distal part of a singular mandibular endite (Figure 8E).
It could be argued that the circular gap of Tc-dac expression in the outer lobe (asterisk in Figure 8D) of mandible limb bud that appears later represents a second endite. However, Tc-dac is not expressed in the inner lobe (particularly the distal part of the inner lobe) which argues against the hypothesis that the inner lobe itself is a separate endite. The two endites, if they exist, would therefore both develop on the outer lobe (Figure 8F). However, there is no obvious endite structure (like a lobe) that could relate to the supposed second endite in the distal part of the outer lobe and we have shown that it is the inner and outer lobes that develop into the incisor and molar processes. This gap of Tc-dac expression appears later during embryogenesis after the endites of other appendages have already formed.
We suggest that the gap in Tc-dac expression is not likely to represent the proximal part of an additional developing endite on the outer lobe, but is more parsimoniously interpreted as representing an expression pattern that is unique to mandibular development, possibly relating to the later development of the incisor process.
Alternative interpretations of the expression data
Although our data are suggestive of the existence of a single mandibular endite, there are alternative explanations that we have not been able to rule out.
Firstly, there are likely to be differences between the endite (or endites) of the mandible and the maxillary endites, which reflect the morphological differences between the two appendage types. These differences could result in differences in gene expression and function. One such difference could be that the inner and outer lobe are two endites that have ‘fused’ to some extent, such that Tc-prd expression has one domain for example.
Furthermore, as the mandible is a derived structure, it seems likely that there will be novel aspects to its development. For example, regarding the expression of dac homologs in the distal part of the mandible, this could represent part of a novel mechanism by which the mandible is patterned and therefore not directly comparable to endites in other appendages. dac homologs may have roles in the formation of the outer lobe that is particular to the mandible.
Finally, and most importantly, explanations of how endites are patterned are currently lacking. Preliminary functional investigations into endite patterning genes have been performed in the dung beetle Onthophagus[27] and Tribolium[28]. Comparing the endite-patterning function of genes between diverse arthropod taxa may be able to answer questions of endite homology in arthropod appendages and the endite composition of the mandible. With reference to our study, the possible endite patterning functions of either Tc-prd, Tc-dac or Tc-wg are not known. Of particular interest is the function of these genes in Tribolium and the possible endite patterning function of Tc-prd homologs, the Pax group III genes [29–31] and dac homologs across Arthropoda.
Serial homology of the mandibular endite to those of the maxilla
This study has relied upon gene expression markers to conclude that the mandible has one endite from which both incisor and molar processes develop. This conclusion would contradict Machida’s hypothesis of serial homology of the incisor and molar process to the galea and lacinia of the maxilla. Machida’s hypothesis has previously been questioned on morphological grounds. Boxshall, for example, rejects Machida’s hypothesis because the endites are present on separate segments in the primitive hexapod maxilla, whereas there is no evidence for a segmental division of the mandibular gnathobase [1].
There still remains the question of serial homology of the mandibular endite, whether it is homologous to either of the maxillary endites, the lacinia or galea.
Consideration of fossil evidence, may also be illuminating: the proximal-most endite present on the primitive biramous limb of Cambrian arthropods such as Martinssonia and Henningsmoenicaris as well as many others [7, 8, 32] has been proposed as a precursor to the mandible gnathal edge which is also the most proximal endite. If there is a serially homologous endite to the mandibular endite, therefore, the most reasonable candidate within the Hexapoda would be the proximal-most endite of the maxilla, that is the lacinia,.
Conclusion
The gene Tc-prd, in addition to its pair-rule function in segmentation, has additional expression domains in the inner and outer lobes of the mandible and the developing endites of the maxillary and labial appendages. Following expression of the single mandibular domain of Tc-prd into late stage Tribolium embryos shows that the inner and outer lobes make up the embryonic mandibular endite and develop into the future incisor and molar processes.
Comparing expression of the Proximal-Distal appendage domain gene Tc-dac and markers for endite development (Tc-prd and Tc-wg) suggests that the inner and outer lobes may be derived from a single endite. As there is only one mandibular endite that divides into two lobes that develop into the molar and incisor processes, we conclude that the mandibular endite has evolved from a single typical lobe-like endite to form an endite consisting of two parts. The mandible endite would have expanded proximally to form the molar process (inner lobe) and distally to form the incisor process (outer lobe). The inner lobe is derived from the proximal half of the endite which is lacking Tc-dac expression and is marked by Tc-prd expression, and the outer lobe is derived from the distal half of the endite (marked by Tc-dac and Tc-prd expression).
Our tentative conclusion, therefore, is that Machida’s hypothesis that the mandible incisor and molar processes are derived from two separate endites homologous to the maxillary galea and lacinia is incorrect and that the gnathal edge of the Tribolium mandible is more likely to have derived from a single endite which may be serially homologous to the proximal-most endite of the maxilla: the lacinia.
Abbreviations
- La:
-
Labial appendage
- L1:
-
first thoracic leg
- Mn:
-
Mandible
- Mx:
-
Maxilla
- PD:
-
Proximal-distal
- Tc-Dll the Tribolium:
-
ortholog of Distal-less (Dll)
- Tc-prd the Tribolium:
-
ortholog of paired (prd)
- Tc-dac the Tribolium:
-
ortholog of Dachshund
- Tc-wg the Tribolium:
-
ortholog of wingless (wg)
- Tc-hth the Tribolium:
-
ortholog of homothorax (hth)
- Tc-ser the Tribolium:
-
ortholog of serrate (ser).
References
Boxshall GA: The evolution of arthropod limbs. Biol Rev Camb Philos Soc. 2004, 79: 253-300. 10.1017/S1464793103006274.
Borner C: Neue Homologien zwischen Crustaceen und Hexapoden. Zool Anz. 1909, 34: 100-125.
Borner C: Die Gliedmaßen der Arthropoden. Handbuch der Morphologie der wirbellosen Tiere. Edited by: Lang A. 1920, Jena: Gustav Fisher, 649-694.
Bitsch J: Morphologie cephalique des machilides. Ann Sci Nat Zool (Paris). 1963, 12: 501-706.
Machida R: Serial homology of the mandible and maxilla in the jumping bristletail Pedetontus unimaculatus Machida, based on external embryology (Hexapoda: Archaeognatha, Machilidae). J Morphol. 2000, 245: 19-28. 10.1002/1097-4687(200007)245:1<19::AID-JMOR2>3.0.CO;2-H.
Oka K, Yoshiyama N, Tojo K, Machida R, Hatakeyama M: Characterization of abdominal appendages in the sawfly, Athalia rosae (Hymenoptera), by morphological and gene expression analyses. Dev Genes Evol. 2010, 220: 53-59. 10.1007/s00427-010-0325-5.
Edgecombe GD: Arthropod phylogeny: an overview from the perspectives of morphology, molecular data and the fossil record. Arthropod Struct Dev. 2010, 39: 74-87. 10.1016/j.asd.2009.10.002.
Zhang XG, Siveter DJ, Waloszek D, Maas A: An epipodite-bearing crown-group crustacean from the Lower Cambrian. Nature. 2007, 449: 595-598. 10.1038/nature06138.
Crampton GC: The phylogenetic origin of the mandibles of insects and their arthropodan relatives - a contribution to the study of the evolution of the Arthropoda. J NY Entomol Soc. 1921, 29: 63-100.
Liu Y, Maas A, Waloszek D: Early embryonic development of the head region of Gryllus assimilis Fabricius, 1775 (Orthoptera, Insecta). Arthropod Struct Dev. 2010, 39: 382-395. 10.1016/j.asd.2010.05.008.
Prpic NM, Tautz D: The expression of the proximodistal axis patterning genes Distal-less and dachshund in the appendages of Glomeris marginata (Myriapoda: Diplopoda) suggests a special role of these genes in patterning the head appendages. Dev Biol. 2003, 260: 97-112. 10.1016/S0012-1606(03)00217-3.
Vanario-Alonso CE, O'Hara E, McGinnis W, Pick L: Targeted ribozymes reveal a conserved function of the Drosophila paired gene in sensory organ development. Mech Dev. 1995, 53: 323-328. 10.1016/0925-4773(95)00448-3.
Aranda M, Marques-Souza H, Bayer T, Tautz D: The role of the segmentation gene hairy in Tribolium. Dev Genes Evol. 2008, 218: 465-477. 10.1007/s00427-008-0240-1.
Prpic NM, Wigand B, Damen WGM, Klingler M: Expression of dachshund in wild-type and Distal-less mutant Tribolium corroborates serial homologies in insect appendages. Dev Genes Evol. 2001, 211: 467-477. 10.1007/s004270100178.
Ronco M, Uda T, Mito T, Minelli A, Noji S, Klingler M: Antenna and all gnathal appendages are similarly transformed by homothorax knock-down in the cricket Gryllus bimaculatus. Dev Biol. 2008, 313: 80-92. 10.1016/j.ydbio.2007.09.059.
Sewell W, Williams T, Cooley J, Terry M, Ho R, Nagy L: Evidence for a novel role for dachshund in patterning the proximal arthropod leg. Dev Genes Evol. 2008, 218: 293-305. 10.1007/s00427-008-0220-5.
Rogers BT, Peterson MD, Kaufman TC: The development and evolution of insect mouthparts as revealed by the expression patterns of gnathocephalic genes. Evol Dev. 2002, 4: 96-110. 10.1046/j.1525-142X.2002.01065.x.
Richards S, Gibbs RA, Weinstock GM, Brown SJ, Denell RE, Beeman RW, Gibbs R, Beeman RW, Brown SJ, Bucher G, Friedrich M, Grimmelikhuijzen CJ, Klingler M, Lorenzen M, Richards S, Roth S, Schroder R, Tautz D, Zdobnov EM, Muzny D, Gibbs RA, Weinstock GM, Attaway T, Bell S, Buhay CJ, Chandrabose MN, Chavez D, Clerk-Blankenburg KP, Cree A, Tribolium Genome Sequencing Consortium: The genome of the model beetle and pest Tribolium castaneum. Nature. 2008, 452: 949-955. 10.1038/nature06784.
Wohlfrom H, Schinko JB, Klingler M, Bucher G: Maintenance of segment and appendage primordia by the Tribolium gene knodel. Mech Dev. 2006, 123: 430-439. 10.1016/j.mod.2006.04.003.
Schinko JB, Posnien N, Kittelmann S, Koniszewski N, Bucher G: Single and double whole-mount in situ hybridization in red flour beetle (Tribolium) embryos. Cold Spring Harb Protoc. 2009, 2009:pdb prot5258
Kosman D, Mizutani CM, Lemons D, Cox WG, McGinnis W, Bier E: Multiplex detection of RNA expression in Drosophila embryos. Science. 2004, 305: 846-10.1126/science.1099247.
GIMP: The GNU Image Manipulation Program. [http://www.gimp.org]
Jockusch EL, Williams TA, Nagy LM: The evolution of patterning of serially homologous appendages in insects. Dev Genes Evol. 2004, 214: 324-338.
Angelini DR, Smith FW, Aspiras AC, Kikuchi M, Jockusch EL: Patterning of the adult mandibulate mouthparts in the red flour beetle. Tribolium castaneum. Genetics. 2012, 190: 639-654. 10.1534/genetics.111.134296.
Prpic NM: Homologs of wingless and decapentaplegic display a complex and dynamic expression profile during appendage development in the millipede Glomeris marginata (Myriapoda: Diplopoda). Front Zool. 2004, 1: 6-10.1186/1742-9994-1-6.
Abzhanov A, Kaufman TC: Homologs of Drosophila appendage genes in the patterning of arthropod limbs. Dev Biol. 2000, 227: 673-689. 10.1006/dbio.2000.9904.
Simonnet F, Moczek AP: Conservation and diversification of gene function during mouthpart development in Onthophagus beetles. Evol dev. 2011, 13: 280-289. 10.1111/j.1525-142X.2011.00479.x.
Angelini DR, Smith FW, Aspiras AC, Kikuchi M, Jockusch EL: Patterning of the adult mandibulate mouthparts in the red flour beetle. Tribolium castaneum. Genetics. 2012, 190: 639-654.
Davis GK, Jaramillo CA, Patel NH: Pax group III genes and the evolution of insect pair-rule patterning. Development. 2001, 128: 3445-3458.
Schoppmeier M, Damen WG: Expression of Pax group III genes suggests a single-segmental periodicity for opisthosomal segment patterning in the spider Cupiennius salei. Evol Dev. 2005, 7: 160-169. 10.1111/j.1525-142X.2005.05018.x.
Janssen R, Budd GE, Prpic NM, Damen WG: Expression of myriapod pair rule gene orthologs. Evodevo. 2011, 2: 5-10.1186/2041-9139-2-5.
Waloszek D, Maas A, Chen JY, Stein M: Evolution of cephalic feeding structures and the phylogeny of Arthropoda. Palaeogeogr, Palaeoclimatol, Palaeoevol. 2007, 254: 273-287. 10.1016/j.palaeo.2007.03.027.
Acknowledgements
The authors would like to thank Gregor Bucher for providing a culture of Tribolium castaneum beetles, Andrew Economou for providing a clone of Tc-wingless and Nikola-Michael Prpic-Schäper for providing a clone of Tc-dachshund.
This work was supported by funding from the Biotechnology and Biological Sciences Research Council (BBSRC).
Author information
Authors and Affiliations
Corresponding author
Additional information
Competing interests
The authors declare that they have no competing interests.
Authors' contributions
JFC and MJT conceived and designed the study. JFC collected the data and analysed the results. JFC and MJT drafted the manuscript and approved the final manuscript for submission. Both authors read and approved the final manuscript.
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Coulcher, J.F., Telford, M.J. Comparative gene expression supports the origin of the incisor and molar process from a single endite in the mandible of the red flour beetle Tribolium castaneum. EvoDevo 4, 1 (2013). https://doi.org/10.1186/2041-9139-4-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/2041-9139-4-1